Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
3 prong bore gage. 7-2-07vp 3-12-09vp: ECN 1500514, Rev 0B to 0C, approved 1-19-09. Opened bore from 20.033 to 20.084. 6-16-14 GJP: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/plating. Meter for anodize plating if necessary. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). 5. Parts are clean and free from manufacturing oil and debris. Tools Required: MITUTOYO 6" CALIPER VERMONT GAGE M8 X 1.25 6H GO/NO GO BORE GAGE .65-.8” TEST PROBE /W .64969 SETTING RING 16.5mm-20.5mm WITH MITUTOYO DATA CABLE