Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
12-8-08vp: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/platingusing ohm meter to verify anodize finish. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). Tools Required: • 6” Mitutoyo Caliper with SPC data cable. • Mitutoyo 3 Point Bore Gage o .5 - .65” Adapter with .64969” Calibration Ring