Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
4-8-49 DLI: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/plating. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). Tools Required: • 1.2 – 1.6” Adapter with 1.20026” Calibration Ring