Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
8-21-14 GJP: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/plating. Meter for anodize plating if necessary. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). 5. Parts are clean and free from manufacturing oil and debris. Tools Required: MITUTOYO 6" CALIPER MITUTOYO 24" CALIPER MITUTOYO 0-1" MICROMETER WITH MITUTOYO DATA CABLE MICROMETER STAND VERMONT GAGE M8 X 1.25 6H GO/NO GO