Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
1-28-13: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/plating. Meter for anodize plating if necessary.. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). Tools Required: MITUTOYO 0-1" MICROMETER MITUTOYO DATA CABLE MITUTOYO MICROMETER STAND MITUTOYO 6" CALIPER MITUTOYO BORE GAUGE