Parts Inspection Lookup
ID:
Part Number:
Dimension:
Description:
Target:
Upper Limit:
Lower Limit:
Notes:
8-2-07vp: Effective after 8-2-07, 10973-XX parts from Industrial Molded Rubber will NOT have the final grind. IMR requested that MFT work directly with R&S Grinding. Qty 261 (IMR PO 9669) + 5 (rejects) will be sent out by Deb to R&S grinding for the final OP. This will be a 2 part inspection. Bore: IMR, OD: R&S Grinding.**Need repeatable QA dimensions, so record after "3 Clicks" on the micrometer. 10-1-08vp: Inspection Criteria 1. Verify 1 pc from each lot per MFT latest drawing. Read ALL notes and past Receiving Inspection History. 2. Verify correct/current Part Number and revision between MFT PO, MFT drawing, supplier packing slip and part markings. 3. Verify material/finish/plating. Meter for anodize plating. 4. Closely check all critical dimensions (dimensions within oval on MFT drawing). (IMR) Tools Required: • 6” Mitutoyo Caliper with SPC data cable. • Mitutoyo 3 Point Bore Gage o .65 - .8” Adapter with .79995” Calibration Ring (R&S Grinding) Tools Required: • 1-2” Mitutoyo Micrometer with SPC data cable/Mic Stand optional.